Cleaning the Rusted Surface by sand paper or wire brush etc.
Dust off the cleaned surface with dry cloth
Apply “Steel Guard NanoCoat” with brush
Allow “SGNC” drying for at least 24 hrs.
Apply Primer & Paint on the “SGNC” treated surface after 24 hrs.
Which will give you 100% Rust-free environment
*Note: Don’t allow water to come in contact with treated surface before Concreting or primer and paint application.
Manual for customers once steel guard is applied on construction steel bars :
1] avoid contact with water/rain prior to actual use of coated steel.
2] avoid staking of steel.
3] use wooden platform/plastic sheet for storage of steel. Don’t dump steel on ground.
4] recoat the bended portion with chemical.
5] don’t unwrap the polythene cover unless needed.